Manufactur standard customized Disposable Capsule Filter for Inkjet Printing and Painting
“Based on domestic market and expand overseas business” is our improvement strategy for Manufactur standard customized Disposable Capsule Filter for Inkjet Printing and Painting, Welcome all nice buyers communicate specifics of products and ideas with us!!
“Based on domestic market and expand overseas business” is our improvement strategy for TS brand Disposable Capsule Filter for printing and painting, Our company regards “reasonable prices, efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
◆ Capsule filters are kind of self contained,ready to use,disposable filters
◆ Made up of polypropylene cage and pleated membrane filter inside by the rmal bonding,free of adhesives,binders and other chemicals
◆ Available with a wide range of connectors and filter medias for options to meet various filtration requirements
◆ Ideal for small batch prefiltration and final filtration of liquids or gas in laboratory
◆ Fully integrity tested before release from manufacture
• Digital inks, paintings
• Small injection and tissue cultures in pharmaceutical industry
• Corrosive liquids/solvents filtration in chemical industry
• Photoresist, acids, etc in electronic industry
• Gas/Air sterile filtration
• Laboratory solutions
| Table : Filter Media and Pore Size available | ||
| Filter Media | TS CODE | Pore Size(um) |
| PES | IPS | 0.10, 0.20, 0.45, 0.65 µm |
| PP | DPP | 0.10, 0.20, 0.45, 1.00, 3.00, 5.00, 10.0 µm |
| PTFE | IPF | 0.10, 0.20, 0.45, 1.00 µm |
| NYLON66 | PNN | 0.10, 0.20, 0.45, 0.65, 1.00 µm |
| PVDF (Hydrophilic) | DHPV | 0.10, 0.20, 0.45, 1.00 µm |
| Materials Of Construction | Filter Media: | PP/PES/PVDF/PTFE/Nylon and other Membranes for Options | ||||
| Support Layers: | Polypropylene | |||||
| Inner core: | Polypropylene | |||||
| Outer Cage, End caps: | Polypropylene | |||||
| Cartridge Dimensions | Outer Diameter | 69mm/60mm | ||||
| Length | Nominal 1.5″, 2.5″, 5″ 10″ | |||||
| Connectors: | MNPT; Hose barb; Sanitary Flange(Tri-Clamp); Compression joint and so on | |||||
| Filtration Area(m2) | 0.045 m2 to 0.44 m2 | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | 2.4 bar (34.8psi) at 25℃ (77℉). | |||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| Sterilization: | Autoclave sterilization 30 minutes, Gamma-irradiation (Need to confirm with Seller) |
|||||
| TYPE | FILTER MEDIA | MICRON | CONNECTIONS | LENGTH | Vent/Drain | |
| K68B – Φ68 (Filtration Area 1200cm2 or 2200cm2 or 4400cm2 for option) | IPS – Polyethersulfone | 0.1um-010 | A- 1 1/2″ Tri-clamp (K68C type only) | 1- 1.5″ (K60 only) | M10 (K68B & K60) | |
| K60 – Φ60 (Filtraion Area 450cm2) | IPP – Polypropylene | 0.2um-020 | B-1/2″ Tri-clamp (K68C type only) | 2 - 2.5″ (K68B&K68C) | 1/8″ Hose Barb (K68C only) | |
| K68C- Φ68(Filtration Area:1200cm2 or 2200cm2 or 4400cm2 for option) | IPF – Polytetrafluoroethylene | 0.45um-045 | C-1/4″MNPT ( K68B&K60 only) | 5- 5″ (K68B&K68C) | ||
| PNN – Nylon | 0.65um-065 | D-1/2″MNPT ( K68B only) | 10- 10″ (K68B&K68C) | |||
| DHPV – PolyvinylideneFluoride | 1um-100 | E- 9/16″ Hose barb (K68B only) | ||||
| CNCA | 5um-500 | F- 1/4″compression joint (K60 only) | ||||
| 10um-1000 | G- 1/4″ Hose Barb (K68B&K60) | |||||
| 50um-5000 | H- 1/2″ Hose Barb (K68B only) | |||||
| X -Others ( If you need other connector pls make inquiry) | ||||||
| For Example: PES membrane, 0.2um, 2200cm2 filtration area, 1.5″ Tri-clamp —K68CIPS020A5 | ||||||
Name: K60-2C-M10
Inlet & outlet: 1/4″compression joint:
Filtration area: 450cm²
Name: K68B-4H-M10 2.5″
Inlet & outlet: 1/2″hose barb
Filtration area: 1200cm²
Name: K68C-TC-1H 5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 2200cm²
Name: K68B-2N-M10 2.5″
Inlet & outlet: 1/4″NPT connector
Filtration area: 1200cm²
Name: K68C-MT-1H 2.5″
Inlet & outlet: 1/2″Sanitary flange connector
Filtration area: 1200cm²
Name: K68C-TC-1H 2.5″
Inlet & outlet: 1.5″Sanitary flange connector
Filtration area: 1200cm²”Based on domestic market and expand overseas business” is our improvement strategy for Manufactur standard customized Disposable Capsule Filter for Inkjet Printing and Painting, Welcome all nice buyers communicate specifics of products and ideas with us!!
Manufactur standard TS brand Disposable Capsule Filter for printing and painting, Our company regards “reasonable prices, efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.
